Calibration target modes

Target mode feature in SoundID Reference

In SoundID Reference we have introduced a Target Mode feature that allows the users to interact and switch between the following modes:

Screenshot_2022-06-10_at_14.46.29__1_.png

If you have an active options/customization panel simply click on the down arrow to close it and bring back the Target mode view.

Screenshot_2022-06-10_at_16.09.06.png

Flat Target mode

Once you have selected your calibration profile Flat Target mode will become enabled. This is a default mode that enables SoundID SR (Studio Reference) experience. 

Screenshot_2022-06-10_at_14.46.29.png

Dolby Atmos Music

When selected, SoundID Reference calibrates audio to the Dolby Atmos Music curve target. End users that have a Dolby Atmos compatible setup will want to use this mode primarily. Use this mode to move sounds in a 3D environment with better precision. This is a fixed Target Mode and won't allow for further adjustments, which is only possible in Custom Target.

Screenshot_2022-06-10_at_14.46.45__1_.png

Custom Target mode

Custom Target allows users to make custom adjustments to the target curve in real-time. Depending on your individual situation, there might be times when you want to make a slight adjustment to the flat target curve delivered by SoundID SR technology to add a little notch here or there.

Screenshot_2022-06-10_at_14.55.52__1_.png

Translation Check mode

Translation check allows you to preview how your mix will sound on various playback devices. 

Screenshot_2022-06-10_at_14.47.24.png

If you require additional assistance you can reach out to support by submitting a support request below.

Contact support

Need a little more help? Submit a request to get help from our Support Team.
Submit a request