As mentioned in our Focal Elear review, the French audio company has been innovating in headphone driver tech for some while now. Like its older brother, Clear uses a 40mm aluminium-magnesium m-shaped dome driver. The catch is that it’s sometimes 2 times the price of Elear, so let’s see what it brings to the table.
P.S. Focal Clear both in its hi-fi oriented version and as Clear Professional sounds the same. Only cosmetics and bundled accessories differ. Therefore this review should work for Clear Professional as well. We’ve measured both and indeed they both showed the same numbers.

  • Superb distortion performance
  • Can be worn for hours on end
  • Superb looks and build quality

Pros list with Sonarworks Reference calibration

  • Bass extension covers the audible range
  • Highs and upper mids become neutral
  • Poor value for money
  • Colored highs and upper mids
Use cases Best use case:
Recreational listening
Tech specs Type
Open back, Over-ear
50 Ohm
6.3 mm stereo jack
450 g (without cable)
Require headphone amp
Headphone amp

Focal Clear has the same high sensitivity as Elear, yet the voice-coil has been changed from 80 to 55 Ohms. This means that from the same source set at the same volume Clear will go louder. Generally, this headphone doesn’t need a dedicated headphone amp to go loud enough, most interfaces will drive it with ease. An amp will come in handy to get the best out of these high-end headphones and so will a high a quality DAC. Most interfaces nowadays have very high quality DAC circuitry, but Focal Clear will let you know if you hook it up to something special like the RME ADI-2 Pro. Will that change the way you make music? Hard to tell. But it sure feels nice!

Build quality

As has been the case with all Focal headphones I’ve handled lately, the build quality is positively stellar. Focal Clear is made mostly out of metal with padded surfaces upholstered with perforated microfiber. The regular Clear comes with three cloth-covered cables which feel nicer than the thick garden hose-like cable that was included with Elear. On the headphone side all cables are terminated with 3.5 mm TS jacks, so repairing cables shouldn’t be too hard. Ear pads are also easily replaceable.


The good news is that for most of the spectrum Clear manages to stay within +/3 dB of a flat response. The bad news… they’re less accurate sounding than Focal Elear or the crowd favorite Sennheiser HD 650. The general tonality is a bit dark with mids taking front stage. 1.4kHz have a curious peak that’s absent from Elear. This will make working with most instruments and voices harder. Like many other headphones, the region around 3kHz is scooped which makes the listening experience smoother. For critical work, the upper mid scoop is a detriment as it robs guitars and electronic instruments from their bite. Many engineers might add too much distortion when using the Clear. Highs are peaky, but amplitude wise these peaks aren’t too horrid. Overtone sounds will be changed. Generally, the Clear seems like a nice headphone for recreational listening, but too colored for critical sound work.

Channel balance

Generally good with some problems in the very low end. The top octave also shows some discrepancies, however, they’re too small to significantly shift the stereo image. Focal has done a decent job here.


Very nice! Comfort matches the luxurious looks of the Clear. The clamp isn’t too hard as the headphone relies on the headband to sit on one’s head. Even after listening to them for 5 hours non-stop no hot spots became apparent. The microfiber makes Clear’s ear pads even comfier than those found on the Utopia because microfiber is more breathable and doesn’t get sweaty after some time. Overall comfort is very good but falls short of the class leader Sennheiser HD 800 S mostly due to the significant weight.


This is where Clear clearly falls short. Its arch-nemesis is Elear, a headphone with a very similar driver, better measured performance and 1/3 less price. It seems like some of Elear’s owners are flocking to the seemingly improved Clear therefore I’ve seen good condition 2nd hand Elears being available for less than 500$. When comparing regular Clear with the Professional version the main difference is cosmetics and included accessories. Clear comes with an extra balanced 4-pin XLR cable, whilst the Clear Pro is bundled with an extra set of ear pads, which will be much more useful for most people. In conclusion, it’s a decent headphone, but if you enjoy its sound, better look for the more reasonably priced Elear.

Observations on how headphones perform after applying Sonarworks Reference calibration Total Harmonic Distortion

There is none to speak of. Even at high SPL’s distortion will remain inaudible. Superb job with the new drivers, Focal!

How accurate and consistent is the correction effect among different listeners?

Consistency between listeners is only fair. Like with the Elear most of the tonal shift occurs at upper mids.

How much do they differ pair to pair in terms of frequency response?

Consistency is very good. Same as we’ve observed with other current Focal headphones and in line with other offerings in this price range.


7.8 / 8.6 / 9.2

Sound rating is a weighted average of Frequency Response, Adaptiveness, Harmonic Distortion and Channel Balance scores, with Frequency Response and Adaptiveness having the greatest influence.

6.5 / 9 / 10

The flatter the frequency response – the higher the score. When evaluating the frequency response score with the Average calibration profile, the pair to pair consistency of the given model is taken into account – if we have measured a considerable frequency response inconsistency among multiple pairs of the given model, the score drops, as the profile loses accuracy. Individual calibration will grant perfectly flat frequency response.


Adaptiveness shows how capable these headphones are at delivering the same perceived frequency response to any listener. Headphones with high score will sound nearly identical to everyone.


Harmonic distortion – the lower the Total Harmonic Distortion (THD) figure, the higher the score. Headphones with prominent 3rd harmonic distortion above 100 Hz will score lower.

9 / 10

Channel balance – the closer to identical the frequency response of both channels, the higher the score. Individual calibration delivers perfect channel balance.


Comfort – shows if headphones can be used for long listening sessions comfortably. Every model is tested by at least a few individuals.


Build – evaluates how well the headphones are put together, the materials used and indicates the expected longevity. Easily replaceable (and easily available) parts will boost the score. We don’t do any stress tests and very few models are used for longer than a couple of days, so this is a fairly subjective score.


Value – indicates the price-performance ratio of the given headphones and how they stack up against the competition. High score means that you won’t find more neutral sounding alternatives for the price.


On its own, the Clear and Clear Professional are very decent headphones. They might not have the stellar imaging of the Sennheiser HD 800 S, but they make up for that with better resolution and a more solid low end. The problem with Clear is Elear, a headphone half the price and 2 times the performance. If Clear was supposed to be an improvement on the Elear, then Focal needs to go back to the drawing board. Currently, it’s more of just a different flavor.

Final Rating

With Sonarworks Reference 4
Calibration Enabled
Without Sonarworks

Remove coloration from your
headphones with Reference 4

Learn more Supported headphones