Setting up with SoundID Reference DAW plugin
Installing the SoundID Reference plugin
Sonarworks headphone and room calibration can be applied in DAW (e.g. Cubase, Logic Pro X, Pro Tools, etc.) using the SoundID Reference plugin format. The plugin can also be loaded in other apps/platforms that feature plugin hosting capability in one of the formats specified below. For example, some advanced music playback apps, like Audirvana, can host plugins too.
SoundID Reference installer (download here) will install the plugins into the common plugin folders on your computer. Here are the SoundID Reference supported plugin formats and their respective default install directories:
- PC: Windows 10 or higher
VST 64-bit: C:\Program Files\VSTPlugins\SoundID Reference VST Plugin x64.dll
VST3 64-bit: C:\Program Files\Common Files\VST3\SoundID Reference VST3 Plugin.vst3
AAX 64-bit: C:\Program Files\Common Files\Avid\Audio\Plug-Ins\SoundID Reference.aaxplugin\Contents\x64\SoundID Reference.aaxplugin
Tip [WIN]: Custom install locations can be assigned on Windows by clicking on Customize during the installation
- MAC: macOS 10.14 or higher
VST: /Macintosh HD/Library/Audio/Plug-Ins/VST/SoundID Reference VST Plugin.vst
VST3: /Macintosh HD/Library/Audio/Plug-Ins/VST3/SoundID Reference VST3 Plugin.vst3
AU: /Macintosh HD/Library/Audio/Plug-Ins/Components/SoundID Reference AU Plugin.component
AAX: /Macintosh HD/Library/Application Support/Avid/Audio/Plug-Ins/SoundID Reference AAX Plugin.aaxplugin
Start using the SoundID Reference DAW plugin
In most cases, your plugin host app (e.g. DAW) will then recognize the plugin automatically on start-up. However, if it doesn't, please make sure that the plugin is located in the correct folder and your host software is scanning the same folder. More troubleshooting details can be found here.
Tip [WIN]: If the plugin is missing in DAW, make sure you are not mixing up the default VST directory with the Steinberg VST directory:
- Create a new session or open an existing project in your DAW
- Find or open your audio mixer view and locate the stereo master bus (the master output channel). If your new session does not have a master bus (e.g. Pro Tools), please create one
- Insert the SoundID Reference as the LAST plugin on the master bus. The example below shows how to load the plugin Logic Pro X:
Load a headphone calibration profile
Headphone calibration profiles are pre-made and readily available in SoundID Reference (all editions). We have measured and averaged close to 300 headphone models - see the full list of supported headphones or simply start a free trial to view what's available.
- Click on Add new preset
- Proceed to Select your calibration profile > Add headphones
- Find your headphone model listed in the app and select the profile
Click on the loaded calibration profile name to change the profile and access the Recent calibration profiles section in the dropdown menu. Learn more about how to use presets here.
From here, you can start exploring the audio settings, check out the new Translation Check and Custom Target features, get familiar with the new sound by enabling/disabling calibration with the dedicated button at the bottom-right corner.
Create and load your speaker calibration profile
If you have already measured your speakers, proceed to load a speaker calibration profile. If not, create a new speaker calibration using the SoundID Reference speaker measurement module and measurement microphone:
- Click on Add new preset
- Proceed to Select your calibration profile > New speaker measurement
- Follow the instructions in the speaker measurement module to create a speaker calibration profile
IMPORTANT! There are NO averaged speaker calibration profiles readily available in the software (as opposed to headphones). Each speaker system sound is unique not just to the speaker model, but also to the individual setup layout and room properties, so each speaker setup has to be measured individually!
Load a speaker calibration profile
- Click on Add new preset > Select a calibration profile
- Proceed to Open an existing profile - this will open the Sonarwoks Projects directory
- Select a speaker calibration profile (.swproj file) and click Open to load it
Important to know when using the plugin
- Keep the SoundID Reference plugin active on the master bus throughout the entire recording, mixing, and mastering process
- Bypass the plugin when rendering your project! SoundID Reference plugin functions as a solution for your individual monitoring setup only. For that reason, it should be hard-bypassed when rendering your project (turn it off completely in the channel strip) to avoid imprinting your unique calibration EQ curve on the track
Streamline your workflow with SoundID Reference in DAW
For a more effective solution, a dedicated monitoring bus can be created for SoundID Reference (not a part of the master output chain). That way, you can avoid bypassing the plugin for rendering and also avoid the volume drop which is introduced by the Safe Headroom feature. For more information on how to avoid the need to bypass the plugin for mixdown, see this article: Streamlining your DAW workflow with SoundID Reference DAW plugin
Some DAWs feature dedicated monitoring plugin sections (for example, the Control Room section in Cubase) which are bypassed automatically for rendering. If your DAW has such a feature, we recommend taking advantage of it.
- Setting up with the SoundID Reference app
- Setting up with speaker calibration
- Setting up on Headphones
- Setting up with SoundID Reference multichannel DAW plugin
If you require additional assistance you can reach out to support by submitting a support request below.