Calibration target modes
Target mode feature in SoundID Reference
In SoundID Reference we have introduced a Target Mode feature that allows the users to interact and switch between the following modes:
If you have an active options/customization panel simply click on the down arrow to close it and bring back the Target mode view.
Flat Target mode
Once you have selected your calibration profile Flat Target mode will become enabled. This is a default mode that enables SoundID SR (Studio Reference) experience.
Dolby Atmos Music
When selected, SoundID Reference calibrates audio to the Dolby Atmos Music curve target. End users that have a Dolby Atmos compatible setup will want to use this mode primarily. Use this mode to move sounds in a 3D environment with better precision. This is a fixed Target Mode and won't allow for further adjustments, which is only possible in Custom Target.
Custom Target mode
Custom Target allows users to make custom adjustments to the target curve in real-time. Depending on your individual situation, there might be times when you want to make a slight adjustment to the flat target curve delivered by SoundID SR technology to add a little notch here or there.
Translation Check mode
Translation check allows you to preview how your mix will sound on various playback devices.
If you require additional assistance you can reach out to support by submitting a support request below.