SoundID Reference Premium Bundle | with Measurement Microphone and Sennheiser HD 650 Headphones

Total €699.00
Free Delivery & Returns (Ts&Cs apply)
Important! Make sure you are visiting the relevant store!
Worldwide site 
Worldwide site 
US site

Product description

All you need for the ultimate accuracy on your studio speakers and headphones! Our Premium bundle includes speaker calibration software with measurement microphone and individually calibrated Sennheiser HD 650 headphones. 
In less than 20 minutes you can calibrate your existing studio speakers with a SoundID Reference measurement microphone and calibrate your existing headphones with more than 280 headphone calibration profiles already included in the software as ready-to-use presets. With an applied calibration profile the software sets the frequency response target to be completely flat across all audible frequencies so you can make music that sounds great everywhere. 
The bundle also includes individually calibrated Sennheiser HD 650 headphones delivering +/-0.9dB accuracy. Individual calibration also accounts for left and right channel differences between drivers making these headphones perfect for monitoring, mixing and mastering. 

Key features

  • Speaker calibration: save as many profiles as needed 
  • Headphone calibration profiles for 280+ supported models
  • Custom target: target curve adjustments in real-time
  • Translation Check: simulating 20+ different devices and device types for accurate mix translation results everywhere without leaving the workstation
  • 3 filter modes: Zero Latency, Mixed and Linear Phase
  • Additional DSP processing controls: Mono, Dry/Wet, and Safe Headroom  
  • MIDI mapping in the SoundID Reference app for various controls
  • User Presets in the SoundID Reference app for switching quickly between predefined output device/channel pair combinations
  • What's included

  • SoundID Reference app for Speakers & Headphones
  • SoundID Reference DAW plugin (AU, VST, AAX) 
  • Averaged profiles for 280+ supported headphone models
  • SoundID Reference Measurement Microphone with individual calibration profile
  • Sennheiser HD 650 headphones with individual calibration profile
  • Activation key for the product license: the product can be activated and used on 3 machines
  • System requirements

  • Mac: macOS 10.12 or later 
  • PC: Windows 8 (64-bit) or later
  • Sonarworks supported or Sonarworks individually calibrated headphones
  • 2.0 or 2.1 stereo speaker system
  • An audio interface featuring +48v Phantom Power and 44.1 kHz sample rate capability
  • Audio hardware setup must consist of a single external hardware device only during the speaker measurement process
  • XLR to XLR audio cable
  • Stable internet connection
  • IMPORTANT! Compatibility with Apple M1 chip machines not guaranteed - read full support statement here
  • Microphone specification

    • Houses pre-polarized electret-condenser capsule
    • Frequency response: 20 Hz - 20kHz with supplied calibration profile
    • Omnidirectional polar pattern
    • Sensitivity is rated at -37dB/Pa (14 mV)
    • Self noise: 24 dB
    • S/N ratio: 70 dB
    • Dynamic range: 106dB
    • Maximum SPL: 132 dB SPL

    Legal information

    Terms and Conditions

    End-user License Agreement

    Right of Withdrawal Application Form

    User Instructions for SoundID Reference Measurement Microphone