Learn how to create a 3-dimensional mix with reverb and delay and the advantages of doing it with headphones.<\/p>\n\n\n\n
The dimensionality of a mix is a very important concept that tends to escape the amateur mix. A two-dimensional mix is not wrong per se, but a three-dimensional mix creates the illusion of music occurring in reality space, which is quite simply a more satisfying listening experience. And yes, the title of the article is a nod to Doctor Who fans.<\/p>\n\n\n\n
Our ability to perceive three-dimensional space with speakers is limited due to physical characteristics of the room they\u2019re in. Reflections, distance between the speakers, the natural reverb of the room, plus the position of the listener, tend to smear our ability to hear a three-dimensional soundscape on speakers.<\/p>\n\n\n\n
With headphones, the \u201cspace,\u201d as no doubt your parents have told you, exists solely between your ears. By eliminating room reflections and variations in your listening position relative to the speakers, headphones make it easier to hear and control the spatial aspects of a mix. In essence, the sweet spot moves with you, locking the subtle spatial cues that enable us to localize sound in place.<\/p>\n\n\n\n
Like Dr. Richard Heyser once said, \u201cThe effect that modern sound reproduction strives to achieve is the creation of an acceptable illusion in the mind of the listener.\u201d<\/p>\n\n\n\n
With headphones, since it\u2019s much easier to hear and control the three-dimensional qualities of a mix, it follows that headphone mixing is the key to creating an engaging and satisfying illusion of sound moving in reality space.<\/p>\n\n\n\n
To make a mix three dimensional, we have several tools to work with. However, the most important in terms of the front-to-back placement of sound in a virtual soundstage are time-based effects. Time-based effects include reverb and delays. While we do have other means to bring sounds forward or backward in a mix, such as volume, EQ, distortion, transient modification, pitch shift, and enhancement, nothing creates the illusion of 3-dimensional space like reverb and delay.<\/p>\n\n\n\n
Beyond creating the illusion of space, reverb has a few uses, which include blending instruments; thickening; creating size; making tonal changes; and adding sustain to an instrument or voice. Reverb can also be used to create rhythmic effects as well. However, the most common use of reverb is to place an instrument in a soundstage, since the first noticeable effect that reverb has on a sound is to push it backward in a mix. The problem is that using reverb to move sounds forward and back is not as effective as delays are due to its masking effect, particularly when over used. In this context, the most important parameter when using reverb is pre-delay.<\/p>\n\n\n\n
Reverb in its essence, is a very complex series of closely spaced delays, based on sound reflecting off numerous surfaces in a room. The important thing to note is that you can\u2019t hear the individual delays. Reverb has several components including the aforementioned pre-delay, which is a measure of time before the first onset of reflected sound occurs. It follows that pre-delay is a function of distance, which makes it the most important parameter in reverb units (a sentiment shared by legendary producer Alan Parsons).<\/p>\n\n\n\n
If you think in terms of distance travelled from an original sound source to the first reflection of that sound off a surface, the pre-delay control determines how far the source is from that surface\u2014generally a back wall. It follows that a short pre-delay would move a sound back in the mix, closer to the rear wall, a long pre-delay moves the sound forward, and no pre-delay pins it against the back wall.<\/p>\n\n\n\n
Long pre-delays have the added advantage of defeating the masking effects of reverb, providing a more defined sound and a cleaner mix. Since pre-delay is measured in milliseconds, a 20ms pre-delay puts the back wall approximately 20 feet away. Keep in mind that in an actual room, there\u2019s no guarantee that sound is going to hit the back wall first.<\/p>\n\n\n\n
However, don\u2019t forget that sound between stereo speakers is an illusion, and in our virtual space, since the reflections of reverb are so complex, we don\u2019t hear sound coming from one side or the other, but rather from front to back, which is more clearly defined by pre-delay. Using pre-delay, we now have a means to place instruments in different positions in the sound field with the added advantage of clarifying them by allowing us to hear the dry sound before the reverb sets in.<\/p>\n\n\n\n
A single mono delay will create a \u201cback wall\u201d for a given sound source to help you define the front-to back dimension of your virtual soundstage. Since lead vocals are the front-most focus of a song, it follows that they would determine the depth of your soundstage. Therefore, the place to start is to create a back wall for your vocals. A common delay setting for vocals is to use an 8th-note mono delay timed to the song\u2019s tempo.<\/p>\n\n\n\n
If you don\u2019t have the ability to select notes as delay values, though nearly all delay plug-ins do, you can either find delay calculators online, or use the formula, 60,000 \/ BPM = delay (in milliseconds). Keep in mind that this formula will give you the delay time for a quarter note in 4\/4 time. Sixty thousand is the number of milliseconds in one minute, and a quarter note equals one beat in 4\/4. Therefore, at 120 BPM, a quarter note is 500ms and an eighth note would be half that, or 250ms. When setting pre-delays for reverb, it\u2019s best to use shorter settings, say between 20-25ms. If you don\u2019t have a pre-delay setting on your reverb, just put a delay in front of it, et voila, instant pre-delay.<\/p>\n\n\n\n
So far, we\u2019ve mainly discussed using reverb and delay for the front-to-back placement of sounds in a mix. In the next installment, we\u2019ll discuss the side-to-side aspects of reverb and delay and how to use them to create width in the stereo field. We\u2019ll also give you some practical tips for using reverb and delays, types of reverbs to use, as well as advice on how to mix reverb in headphones. See you next time.<\/p>\n","protected":false},"excerpt":{"rendered":"
Learn how to create a 3-dimensional mix with reverb and delay and the advantages of doing it with headphones. Creating a Satisfying Illusion for the Listener The dimensionality of a mix is a very important concept that tends to escape the amateur mix. A two-dimensional mix is not wrong per se, but a three-dimensional mix…<\/p>\n","protected":false},"author":4,"featured_media":2547,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_improvement_type_select":"improve_an_existing","_thumb_yes_seoaic":false,"_frame_yes_seoaic":false,"seoaic_generate_description":"","seoaic_improve_instructions_prompt":"","seoaic_rollback_content_improvement":"","seoaic_idea_thumbnail_generator":"","thumbnail_generated":false,"thumbnail_generate_prompt":"","seoaic_article_description":"","inline_featured_image":false,"seoaic_article_subtitles":[]},"categories":[81],"tags":[85,101],"acf":[],"yoast_head":"\n